| 50MM/65MM/110MM :- | ||||||
| PROD. NO | PH | A | B | B1 | L | WT. GMS |
| SBPF5026 | 2 | 1.0 | 6 | 6 | 50 | 10.0 |
| SBPF65145 | 1 | 1.0 | 4.5 | 6.35 | 65 | 14.0 |
| SBPF65255 | 2 | 1.0 | 5.5 | 6.35 | 65 | 14.0 |
| SBPF65365 | 3 | 1.0 | 6.5 | 6.35 | 65 | 14.0 |
| SBPF11026 | 2 | 1.0 | 6 | 6 | 110 | 25.0 |
Quantity- 1 pc
HSN Code: 82054000
TAPARIA Screw Driver Bits are:-
• Accurately hardened & Tempered to 56-60 HRC.
• To withstand high torque and high wear resistance properties.
• Precisely machined Philips, Torx, Flat& Hexagon Tips.
• One of the widest range of quality Screw Driver Bits in India.
Design No : 177211 | HSN Code : 82054000
Blade Length (mm) 125
Blade Dia. 6
Tim Dimensions (mm) 6.0 x 0.8
Std. Pkg. 10
Quantity Contain:-1 pc
The blade is made from high grade Silicon – Manganese steel which no other make uses. This steel gives spring effect also.
The blade is differently hardened and tempered to resist wear, bending and meet high torque requirement. Other makes offer same hardness through out the length of the blade, which is not scientific.
Hardness on tip : 55 to 58 HRC. Other makes offer much less hardness on tip. Higher the hardness higher is wear resistance.
The blade tip is magnetized to lift small screw etc. from confined spaces or to hold the the screw in position.
Design No : 177211 | HSN Code : 82054000
Blade Length (mm) 200
Blade Dia. 6
Tim Dimensions (mm) 6.0 x 0.8
Std. Pkg. 10
Quantity Contain:-1 pc
The blade is made from high grade Silicon – Manganese steel which no other make uses. This steel gives spring effect also.
The blade is differently hardened and tempered to resist wear, bending and meet high torque requirement. Other makes offer same hardness through out the length of the blade, which is not scientific.
Hardness on tip : 55 to 58 HRC. Other makes offer much less hardness on tip. Higher the hardness higher is wear resistance.
The blade tip is magnetized to lift small screw etc. from confined spaces or to hold the the screw in position.
Design No : 177211 | HSN Code : 82054000
Blade Length (mm) 125
Blade Dia. 4
Tim Dimensions (mm) 4.0 x 0.6
Std. Pkg. 10
Quantity Contain:-1 pc
The blade is made from high grade Silicon – Manganese steel which no other make uses. This steel gives spring effect also.
The blade is differently hardened and tempered to resist wear, bending and meet high torque requirement. Other makes offer same hardness through out the length of the blade, which is not scientific.
Hardness on tip : 55 to 58 HRC. Other makes offer much less hardness on tip. Higher the hardness higher is wear resistance.
The blade tip is magnetized to lift small screw etc. from confined spaces or to hold the the screw in position.
Design No : 177211 | HSN Code : 82054000
Blade Length (mm) 75
Blade Dia. 3.5
Tim Dimensions (mm) 3.5 x 0.5
Std. Pkg. 10
Quantity Contain:-1 pc
The blade is made from high grade Silicon – Manganese steel which no other make uses. This steel gives spring effect also.
The blade is differently hardened and tempered to resist wear, bending and meet high torque requirement. Other makes offer same hardness through out the length of the blade, which is not scientific.
Hardness on tip : 55 to 58 HRC. Other makes offer much less hardness on tip. Higher the hardness higher is wear resistance.
The blade tip is magnetized to lift small screw etc. from confined spaces or to hold the the screw in position.
Reviews
There are no reviews yet.