September 21, 2024

Showing 757–768 of 2795 results

  • Flat Screw Driver (712) Taparia

    40.00

    Design No : 177211 | HSN Code : 82054000

    Blade Length (mm)  125

    Blade Dia.  4

    Tim Dimensions (mm)  4.0 x 0.6

    Std. Pkg. 10

    Quantity Contain:-1 pc

    The blade is made from high grade Silicon – Manganese steel which no other make uses. This steel gives spring effect also.

    The blade is differently hardened and tempered to resist wear, bending and meet high torque requirement. Other makes offer same hardness through out the length of the blade, which is not scientific.

    Hardness on tip : 55 to 58 HRC. Other makes offer much less hardness on tip. Higher the hardness higher is wear resistance.

    The blade tip is magnetized to lift small screw etc. from confined spaces or to hold the the screw in position.

  • Flat Screw Driver (713) Taparia

    47.00

    Design No : 177211 | HSN Code : 82054000

    Blade Length (mm)  75

    Blade Dia.  5

    Tim Dimensions (mm)  5.0 x 0.6

    Std. Pkg. 10

    Quantity Contain:-1 pc

    The blade is made from high grade Silicon – Manganese steel which no other make uses. This steel gives spring effect also.

    The blade is differently hardened and tempered to resist wear, bending and meet high torque requirement. Other makes offer same hardness through out the length of the blade, which is not scientific.

    Hardness on tip : 55 to 58 HRC. Other makes offer much less hardness on tip. Higher the hardness higher is wear resistance.

    The blade tip is magnetized to lift small screw etc. from confined spaces or to hold the the screw in position.

  • Flat Screw Driver (725) Taparia

    80.00

    Design No : 177211 | HSN Code : 82054000

    Blade Length (mm)  150

    Blade Dia.  8

    Tim Dimensions (mm) 8.0 x 1.2

    Std. Pkg. 10

    Quantity Contain:-1 pc

    The blade is made from high grade Silicon – Manganese steel which no other make uses. This steel gives spring effect also.

    The blade is differently hardened and tempered to resist wear, bending and meet high torque requirement. Other makes offer same hardness through out the length of the blade, which is not scientific.

    Hardness on tip : 55 to 58 HRC. Other makes offer much less hardness on tip. Higher the hardness higher is wear resistance.

    The blade tip is magnetized to lift small screw etc. from confined spaces or to hold the the screw in position.

  • Flat Screw Driver (824) Taparia

    60.00

    Design No : 177211 | HSN Code : 82054000

    Blade Length (mm)  150

    Blade Dia.  6

    Tim Dimensions (mm) 6.0 x 0.8

    Std. Pkg. 10

    Quantity Contain:-1 pc

    The blade is made from high grade Silicon – Manganese steel which no other make uses. This steel gives spring effect also.

    The blade is differently hardened and tempered to resist wear, bending and meet high torque requirement. Other makes offer same hardness through out the length of the blade, which is not scientific.

    Hardness on tip : 55 to 58 HRC. Other makes offer much less hardness on tip. Higher the hardness higher is wear resistance.

    The blade tip is magnetized to lift small screw etc. from confined spaces or to hold the the screw in position.

  • Flat Screw Driver (825) Taparia

    63.00

    Design No : 177211 | HSN Code : 82054000

    Blade Length (mm)  200

    Blade Dia.  6

    Tim Dimensions (mm) 6.0 x 0.8

    Std. Pkg. 10

    Quantity Contain:-1 pc

    The blade is made from high grade Silicon – Manganese steel which no other make uses. This steel gives spring effect also.

    The blade is differently hardened and tempered to resist wear, bending and meet high torque requirement. Other makes offer same hardness through out the length of the blade, which is not scientific.

    Hardness on tip : 55 to 58 HRC. Other makes offer much less hardness on tip. Higher the hardness higher is wear resistance.

    The blade tip is magnetized to lift small screw etc. from confined spaces or to hold the the screw in position.

  • Flat Screw Driver (826) Taparia

    68.00

    Design No : 177211 | HSN Code : 82054000

    Blade Length (mm)  250

    Blade Dia.  6

    Tim Dimensions (mm) 6.0 x 0.8

    Std. Pkg. 10

    Quantity Contain:-1 pc

    The blade is made from high grade Silicon – Manganese steel which no other make uses. This steel gives spring effect also.

    The blade is differently hardened and tempered to resist wear, bending and meet high torque requirement. Other makes offer same hardness through out the length of the blade, which is not scientific.

    Hardness on tip : 55 to 58 HRC. Other makes offer much less hardness on tip. Higher the hardness higher is wear resistance.

    The blade tip is magnetized to lift small screw etc. from confined spaces or to hold the the screw in position.

  • Flat Screw Driver (827) Taparia

    91.00

    Design No : 177211 | HSN Code : 82054000

    Blade Length (mm)  200

    Blade Dia.  8

    Tim Dimensions (mm) 8.0 x 1.2

    Std. Pkg. 10

    Quantity Contain:-1 pc

    The blade is made from high grade Silicon – Manganese steel which no other make uses. This steel gives spring effect also.

    The blade is differently hardened and tempered to resist wear, bending and meet high torque requirement. Other makes offer same hardness through out the length of the blade, which is not scientific.

    Hardness on tip : 55 to 58 HRC. Other makes offer much less hardness on tip. Higher the hardness higher is wear resistance.

    The blade tip is magnetized to lift small screw etc. from confined spaces or to hold the the screw in position.

  • Flat Screw Driver (828) Taparia

    100.00

    Design No : 177211 | HSN Code : 82054000

    Blade Length (mm)  250

    Blade Dia.  8

    Tim Dimensions (mm) 8.0 x 1.2

    Std. Pkg. 10

    Quantity Contain:-1 pc

    The blade is made from high grade Silicon – Manganese steel which no other make uses. This steel gives spring effect also.

    The blade is differently hardened and tempered to resist wear, bending and meet high torque requirement. Other makes offer same hardness through out the length of the blade, which is not scientific.

    Hardness on tip : 55 to 58 HRC. Other makes offer much less hardness on tip. Higher the hardness higher is wear resistance.

    The blade tip is magnetized to lift small screw etc. from confined spaces or to hold the the screw in position.

  • Flat Screw Driver (829) Taparia

    103.00

    Design No : 177211 | HSN Code : 82054000

    Blade Length (mm)  300

    Blade Dia.  8

    Tim Dimensions (mm) 8.0 x 1.2

    Std. Pkg. 10

    Quantity Contain:-1 pc

    The blade is made from high grade Silicon – Manganese steel which no other make uses. This steel gives spring effect also.

    The blade is differently hardened and tempered to resist wear, bending and meet high torque requirement. Other makes offer same hardness through out the length of the blade, which is not scientific.

    Hardness on tip : 55 to 58 HRC. Other makes offer much less hardness on tip. Higher the hardness higher is wear resistance.

    The blade tip is magnetized to lift small screw etc. from confined spaces or to hold the the screw in position.

  • Flat Screw Driver (833) Taparia

    46.00

    Design No : 177211 | HSN Code : 82054000

    Blade Length (mm)  200

    Blade Dia.  4

    Tim Dimensions (mm)  4.0 x 0.6

    Std. Pkg. 10

    Quantity Contain:-1 pc

    The blade is made from high grade Silicon – Manganese steel which no other make uses. This steel gives spring effect also.

    The blade is differently hardened and tempered to resist wear, bending and meet high torque requirement. Other makes offer same hardness through out the length of the blade, which is not scientific.

    Hardness on tip : 55 to 58 HRC. Other makes offer much less hardness on tip. Higher the hardness higher is wear resistance.

    The blade tip is magnetized to lift small screw etc. from confined spaces or to hold the the screw in position.

  • Flat Screw Driver (842) Taparia

    37.00

    Design No : 177211 | HSN Code : 82054000

    Blade Length (mm)  150

    Blade Dia.  3.5

    Tim Dimensions (mm)  3.5 x 0.5

    Std. Pkg. 10

    Quantity Contain:-1 pc

    The blade is made from high grade Silicon – Manganese steel which no other make uses. This steel gives spring effect also.

    The blade is differently hardened and tempered to resist wear, bending and meet high torque requirement. Other makes offer same hardness through out the length of the blade, which is not scientific.

    Hardness on tip : 55 to 58 HRC. Other makes offer much less hardness on tip. Higher the hardness higher is wear resistance.

    The blade tip is magnetized to lift small screw etc. from confined spaces or to hold the the screw in position.

  • Flat Screw Driver (901) Taparia

    37.00

    Design No : 177211 | HSN Code : 82054000

    Blade Length (mm)  75

    Blade Dia.  3

    Tim Dimensions (mm)  3.0 x 0.5

    Std. Pkg. 10

    Quantity Contain:-1 pc

    The blade is made from high grade Silicon – Manganese steel which no other make uses. This steel gives spring effect also.

    The blade is differently hardened and tempered to resist wear, bending and meet high torque requirement. Other makes offer same hardness through out the length of the blade, which is not scientific.

    Hardness on tip : 55 to 58 HRC. Other makes offer much less hardness on tip. Higher the hardness higher is wear resistance.

    The blade tip is magnetized to lift small screw etc. from confined spaces or to hold the the screw in position.

0
    0
    Your Cart
    Your cart is emptyReturn to Shop