September 21, 2024

Showing 769–780 of 2795 results

  • Flat Screw Driver (902) Taparia

    38.00

    Design No : 177211 | HSN Code : 82054000

    Blade Length (mm)  100

    Blade Dia.  3

    Tim Dimensions (mm)  3.0 x 0.5

    Std. Pkg. 10

    Quantity Contain:-1 pc

    The blade is made from high grade Silicon – Manganese steel which no other make uses. This steel gives spring effect also.

    The blade is differently hardened and tempered to resist wear, bending and meet high torque requirement. Other makes offer same hardness through out the length of the blade, which is not scientific.

    Hardness on tip : 55 to 58 HRC. Other makes offer much less hardness on tip. Higher the hardness higher is wear resistance.

    The blade tip is magnetized to lift small screw etc. from confined spaces or to hold the the screw in position.

  • Flat Screw Driver (911) Taparia

    29.00

    Design No : 177211 | HSN Code : 82054000

    Blade Length (mm)  50

    Blade Dia.  3

    Tim Dimensions (mm)  3.0 x 0.4

    Std. Pkg. 10

    Quantity Contain:-1 pc

    The blade is made from high grade Silicon – Manganese steel which no other make uses. This steel gives spring effect also.

    The blade is differently hardened and tempered to resist wear, bending and meet high torque requirement. Other makes offer same hardness through out the length of the blade, which is not scientific.

    Hardness on tip : 55 to 58 HRC. Other makes offer much less hardness on tip. Higher the hardness higher is wear resistance.

    The blade tip is magnetized to lift small screw etc. from confined spaces or to hold the the screw in position.

  • Flat Screw Driver (912) Taparia

    36.00

    Design No : 177211 | HSN Code : 82054000

    Blade Length (mm)  75

    Blade Dia.  3.5

    Tim Dimensions (mm)  3.5 x 0.5

    Std. Pkg. 10

    Quantity Contain:-1 pc

    The blade is made from high grade Silicon – Manganese steel which no other make uses. This steel gives spring effect also.

    The blade is differently hardened and tempered to resist wear, bending and meet high torque requirement. Other makes offer same hardness through out the length of the blade, which is not scientific.

    Hardness on tip : 55 to 58 HRC. Other makes offer much less hardness on tip. Higher the hardness higher is wear resistance.

    The blade tip is magnetized to lift small screw etc. from confined spaces or to hold the the screw in position.

  • Flat Screw Driver (913) Taparia

    43.00

    Design No : 177211 | HSN Code : 82054000

    Blade Length (mm)  100

    Blade Dia.  4

    Tim Dimensions (mm)  4.0 x 0,6

    Std. Pkg. 10

    Quantity Contain:-1 pc

    The blade is made from high grade Silicon – Manganese steel which no other make uses. This steel gives spring effect also.

    The blade is differently hardened and tempered to resist wear, bending and meet high torque requirement. Other makes offer same hardness through out the length of the blade, which is not scientific.

    Hardness on tip : 55 to 58 HRC. Other makes offer much less hardness on tip. Higher the hardness higher is wear resistance.

    The blade tip is magnetized to lift small screw etc. from confined spaces or to hold the the screw in position.

  • Flat Screw Driver (921) Taparia

    49.00

    Design No : 177211 | HSN Code : 82054000

    Blade Length (mm) 75

    Blade Dia. (mm)  6

    Tim Dimensions (mm)  6.0 x 0.6

    Std. Pkg. 10

    Quantity Contain:-1 pc

    The blade is made from high grade Silicon – Manganese steel which no other make uses. This steel gives spring effect also.

    The blade is differently hardened and tempered to resist wear, bending and meet high torque requirement. Other makes offer same hardness through out the length of the blade, which is not scientific.

    Hardness on tip : 55 to 58 HRC. Other makes offer much less hardness on tip. Higher the hardness higher is wear resistance.

    The blade tip is magnetized to lift small screw etc. from confined spaces or to hold the the screw in position.

  • Flat Screw Driver (922) Taparia

    49.00

    Design No : 177211 | HSN Code : 82054000

    Blade Length (mm)  100

    Blade Dia.  6

    Tim Dimensions (mm)  6.0 x 0.6

    Std. Pkg. 10

    Quantity Contain:-1 pc

    The blade is made from high grade Silicon – Manganese steel which no other make uses. This steel gives spring effect also.

    The blade is differently hardened and tempered to resist wear, bending and meet high torque requirement. Other makes offer same hardness through out the length of the blade, which is not scientific.

    Hardness on tip : 55 to 58 HRC. Other makes offer much less hardness on tip. Higher the hardness higher is wear resistance.

    The blade tip is magnetized to lift small screw etc. from confined spaces or to hold the the screw in position.

  • Flat Screw Driver (923) Taparia

    50.00

    Design No : 177211 | HSN Code : 82054000

    Blade Length (mm)  125

    Blade Dia.  6

    Tim Dimensions (mm)  6.0 x 0.8

    Std. Pkg. 10

    Quantity Contain:-1 pc

    The blade is made from high grade Silicon – Manganese steel which no other make uses. This steel gives spring effect also.

    The blade is differently hardened and tempered to resist wear, bending and meet high torque requirement. Other makes offer same hardness through out the length of the blade, which is not scientific.

    Hardness on tip : 55 to 58 HRC. Other makes offer much less hardness on tip. Higher the hardness higher is wear resistance.

    The blade tip is magnetized to lift small screw etc. from confined spaces or to hold the the screw in position.

  • Flat Screw Driver (924) Taparia

    82.00

    Design No : 177211 | HSN Code : 82054000

    Blade Length (mm)  125

    Blade Dia.  8

    Tim Dimensions (mm)  8.0 x 1.0

    Std. Pkg. 10

    Quantity Contain:-1 pc

    The blade is made from high grade Silicon – Manganese steel which no other make uses. This steel gives spring effect also.

    The blade is differently hardened and tempered to resist wear, bending and meet high torque requirement. Other makes offer same hardness through out the length of the blade, which is not scientific.

    Hardness on tip : 55 to 58 HRC. Other makes offer much less hardness on tip. Higher the hardness higher is wear resistance.

    The blade tip is magnetized to lift small screw etc. from confined spaces or to hold the the screw in position.

  • Flat Screw Driver (925) Taparia

    84.00

    Design No : 177211 | HSN Code : 82054000

    Blade Length (mm)  155

    Blade Dia.  8

    Tim Dimensions (mm) 8.0 x 1.2

    Std. Pkg. 10

    Quantity Contain:-1 pc

    The blade is made from high grade Silicon – Manganese steel which no other make uses. This steel gives spring effect also.

    The blade is differently hardened and tempered to resist wear, bending and meet high torque requirement. Other makes offer same hardness through out the length of the blade, which is not scientific.

    Hardness on tip : 55 to 58 HRC. Other makes offer much less hardness on tip. Higher the hardness higher is wear resistance.

    The blade tip is magnetized to lift small screw etc. from confined spaces or to hold the the screw in position.

  • Flat Screw Driver (926) Taparia

    90.00

    Design No : 177211 | HSN Code : 82054000

    Blade Length (mm)  175

    Blade Dia.  8

    Tim Dimensions (mm) 8.0 x 1.2

    Std. Pkg. 10

    Quantity Contain:-1 pc

    The blade is made from high grade Silicon – Manganese steel which no other make uses. This steel gives spring effect also.

    The blade is differently hardened and tempered to resist wear, bending and meet high torque requirement. Other makes offer same hardness through out the length of the blade, which is not scientific.

    Hardness on tip : 55 to 58 HRC. Other makes offer much less hardness on tip. Higher the hardness higher is wear resistance.

    The blade tip is magnetized to lift small screw etc. from confined spaces or to hold the the screw in position.

  • Flat Screw Driver (927) Taparia

    152.00

    Design No : 177211 | HSN Code : 82054000

    Blade Length (mm)  200

    Blade Dia.  10

    Tim Dimensions (mm)  10.0 x 1.2

    Std. Pkg. 10

    Quantity Contain:-1 pc

    The blade is made from high grade Silicon – Manganese steel which no other make uses. This steel gives spring effect also.

    The blade is differently hardened and tempered to resist wear, bending and meet high torque requirement. Other makes offer same hardness through out the length of the blade, which is not scientific.

    Hardness on tip : 55 to 58 HRC. Other makes offer much less hardness on tip. Higher the hardness higher is wear resistance.

    The blade tip is magnetized to lift small screw etc. from confined spaces or to hold the the screw in position.

  • Flat Screw Driver (928) Taparia

    157.00

    Design No : 177211 | HSN Code : 82054000

    Blade Length (mm)  250

    Blade Dia.  10

    Tim Dimensions (mm)  10.0 x 1.2

    Std. Pkg. 10

    Quantity Contain:-1 pc

    The blade is made from high grade Silicon – Manganese steel which no other make uses. This steel gives spring effect also.

    The blade is differently hardened and tempered to resist wear, bending and meet high torque requirement. Other makes offer same hardness through out the length of the blade, which is not scientific.

    Hardness on tip : 55 to 58 HRC. Other makes offer much less hardness on tip. Higher the hardness higher is wear resistance.

    The blade tip is magnetized to lift small screw etc. from confined spaces or to hold the the screw in position.

0
    0
    Your Cart
    Your cart is emptyReturn to Shop