September 7, 2024

Showing 25–36 of 192 results

  • Torx Screw Drivers (T-6L) Taparia

    49.00

    Brand Taparia
    Material High Grade Steel
    Std. Quantity 1 pc
    Blade Length (mm) 150
    Blade Dia. (mm) 3.0
    Finish Type (Handle) Transparent green cellulose
    Type of Product Striking Screw Drivers
  • Torx Screw Drivers (T-5L) Taparia

    46.00

    Brand Taparia
    Material High Grade Steel
    Std. Quantity 1 pc
    Blade Length (mm) 150
    Blade Dia. (mm) 3.0
    Finish Type (Handle) Transparent green cellulose
    Type of Product Striking Screw Drivers
  • Torx Screw Drivers (T-5) Taparia

    41.00

    Brand Taparia
    Material High Grade Steel
    Std. Quantity 1 pc
    Blade Length (mm) 75
    Blade Dia. (mm) 3.0
    Finish Type (Handle) Transparent green cellulose
    Type of Product Striking Screw Drivers
  • Hexagonal Screw Driver With Insulation & Opaque Handle (Two In One) (OH9031) Taparia

    131.00

    HSN Code : 82054000

    Hex Blade Length (mm)  250

    Hex Blade A/F (mm)  6.0

    Tip Dimensions :

    Phillips  2

    Flat (mm)  5.8 x 0.8

    Std. Pkg.  20 N + (1N as a Complementary)

  • Flat Screw Driver (932) Taparia

    28.00

    Design No. 177211 | HSN Code : 82054000

    Blade Length  50

    Blade Dia. 3

    Tip Dimensions  1.6 x o.4

    Std. Pkg. 10

    Quantity Contain:-1 pc

    The blade is made from high grade Silicon – Manganese steel which no other make uses. This steel gives spring effect also.

    The blade is differently hardened and tempered to resist wear, bending and meet high torque requirement. Other makes offer same hardness through out the length of the blade, which is not scientific.

    Hardness on tip : 55 to 58 HRC. Other makes offer much less hardness on tip. Higher the hardness higher is wear resistance.

    The blade tip is magnetized to lift small screw etc. from confined spaces or to hold the the screw in position.

  • Flat Screw Driver (933) Taparia

    29.00

    Design No : 177211 | HSN Code : 82054000

    Blade Length (mm)  75

    Blade Dia.  3

    Tim Dimensions (mm)  1.6 x 0.4

    Std. Pkg. 10

    Quantity Contain:-1 pc

    The blade is made from high grade Silicon – Manganese steel which no other make uses. This steel gives spring effect also.

    The blade is differently hardened and tempered to resist wear, bending and meet high torque requirement. Other makes offer same hardness through out the length of the blade, which is not scientific.

    Hardness on tip : 55 to 58 HRC. Other makes offer much less hardness on tip. Higher the hardness higher is wear resistance.

    The blade tip is magnetized to lift small screw etc. from confined spaces or to hold the the screw in position.

  • Flat Screw Driver (911) Taparia

    29.00

    Design No : 177211 | HSN Code : 82054000

    Blade Length (mm)  50

    Blade Dia.  3

    Tim Dimensions (mm)  3.0 x 0.4

    Std. Pkg. 10

    Quantity Contain:-1 pc

    The blade is made from high grade Silicon – Manganese steel which no other make uses. This steel gives spring effect also.

    The blade is differently hardened and tempered to resist wear, bending and meet high torque requirement. Other makes offer same hardness through out the length of the blade, which is not scientific.

    Hardness on tip : 55 to 58 HRC. Other makes offer much less hardness on tip. Higher the hardness higher is wear resistance.

    The blade tip is magnetized to lift small screw etc. from confined spaces or to hold the the screw in position.

  • Flat Screw Driver (902) Taparia

    38.00

    Design No : 177211 | HSN Code : 82054000

    Blade Length (mm)  100

    Blade Dia.  3

    Tim Dimensions (mm)  3.0 x 0.5

    Std. Pkg. 10

    Quantity Contain:-1 pc

    The blade is made from high grade Silicon – Manganese steel which no other make uses. This steel gives spring effect also.

    The blade is differently hardened and tempered to resist wear, bending and meet high torque requirement. Other makes offer same hardness through out the length of the blade, which is not scientific.

    Hardness on tip : 55 to 58 HRC. Other makes offer much less hardness on tip. Higher the hardness higher is wear resistance.

    The blade tip is magnetized to lift small screw etc. from confined spaces or to hold the the screw in position.

  • Flat Screw Driver (901) Taparia

    37.00

    Design No : 177211 | HSN Code : 82054000

    Blade Length (mm)  75

    Blade Dia.  3

    Tim Dimensions (mm)  3.0 x 0.5

    Std. Pkg. 10

    Quantity Contain:-1 pc

    The blade is made from high grade Silicon – Manganese steel which no other make uses. This steel gives spring effect also.

    The blade is differently hardened and tempered to resist wear, bending and meet high torque requirement. Other makes offer same hardness through out the length of the blade, which is not scientific.

    Hardness on tip : 55 to 58 HRC. Other makes offer much less hardness on tip. Higher the hardness higher is wear resistance.

    The blade tip is magnetized to lift small screw etc. from confined spaces or to hold the the screw in position.

  • Flat Screw Driver (912) Taparia

    36.00

    Design No : 177211 | HSN Code : 82054000

    Blade Length (mm)  75

    Blade Dia.  3.5

    Tim Dimensions (mm)  3.5 x 0.5

    Std. Pkg. 10

    Quantity Contain:-1 pc

    The blade is made from high grade Silicon – Manganese steel which no other make uses. This steel gives spring effect also.

    The blade is differently hardened and tempered to resist wear, bending and meet high torque requirement. Other makes offer same hardness through out the length of the blade, which is not scientific.

    Hardness on tip : 55 to 58 HRC. Other makes offer much less hardness on tip. Higher the hardness higher is wear resistance.

    The blade tip is magnetized to lift small screw etc. from confined spaces or to hold the the screw in position.

  • Flat Screw Driver (842) Taparia

    37.00

    Design No : 177211 | HSN Code : 82054000

    Blade Length (mm)  150

    Blade Dia.  3.5

    Tim Dimensions (mm)  3.5 x 0.5

    Std. Pkg. 10

    Quantity Contain:-1 pc

    The blade is made from high grade Silicon – Manganese steel which no other make uses. This steel gives spring effect also.

    The blade is differently hardened and tempered to resist wear, bending and meet high torque requirement. Other makes offer same hardness through out the length of the blade, which is not scientific.

    Hardness on tip : 55 to 58 HRC. Other makes offer much less hardness on tip. Higher the hardness higher is wear resistance.

    The blade tip is magnetized to lift small screw etc. from confined spaces or to hold the the screw in position.

  • Flat Screw Driver (913) Taparia

    43.00

    Design No : 177211 | HSN Code : 82054000

    Blade Length (mm)  100

    Blade Dia.  4

    Tim Dimensions (mm)  4.0 x 0,6

    Std. Pkg. 10

    Quantity Contain:-1 pc

    The blade is made from high grade Silicon – Manganese steel which no other make uses. This steel gives spring effect also.

    The blade is differently hardened and tempered to resist wear, bending and meet high torque requirement. Other makes offer same hardness through out the length of the blade, which is not scientific.

    Hardness on tip : 55 to 58 HRC. Other makes offer much less hardness on tip. Higher the hardness higher is wear resistance.

    The blade tip is magnetized to lift small screw etc. from confined spaces or to hold the the screw in position.

0
    0
    Your Cart
    Your cart is emptyReturn to Shop